SCSI Read(10)是一種用于從SCSI設備讀取數據的命令。下面是一個簡單的示例代碼，演示如何使用SCSI Read(10)命令來讀取指定大小的文件：

#include <stdio.h>
#include <stdlib.h>
#include <string.h>#define READ_CAPACITY_CMD    0x25
#define READ_10_CMD          0x28#define DATA_BUFFER_SIZE     4096void scsi_read(FILE* scsi_device, unsigned long long start_sector, unsigned int block_size, unsigned int num_blocks)
{unsigned char read_buffer[DATA_BUFFER_SIZE];unsigned char read_cmd[10] = {READ_10_CMD,0x00,(start_sector >> 24) & 0xFF,(start_sector >> 16) & 0xFF,(start_sector >> 8) & 0xFF,start_sector & 0xFF,0x00,(num_blocks >> 8) & 0xFF,num_blocks & 0xFF,0x00};memset(read_buffer, 0, sizeof(read_buffer));fseek(scsi_device, 0, SEEK_SET);  // 將文件指針移到開始位置// 發送SCSI命令fwrite(read_cmd, 1, sizeof(read_cmd), scsi_device);fflush(scsi_device);// 讀取數據fread(read_buffer, block_size, num_blocks, scsi_device);// 可以在這里對讀取到的數據進行處理或保存// 打印讀取到的內容（僅用于示例）printf("Read Data:\n");for (int i = 0; i < num_blocks * block_size; i++){printf("%02X ", read_buffer[i]);if ((i + 1) % block_size == 0)printf("\n");}
}int main()
{// 打開SCSI設備文件（假設為/dev/sdc）FILE* scsi_device = fopen("/dev/sdc", "rb");if (scsi_device == NULL){printf("Failed to open SCSI device.\n");return 1;}unsigned long long start_sector = 0;   // 起始扇區unsigned int block_size = 512;         // 塊大小（字節）unsigned int num_blocks = 10;          // 讀取的塊數// 調用SCSI讀取函數scsi_read(scsi_device, start_sector, block_size, num_blocks);// 關閉SCSI設備文件fclose(scsi_device);return 0;
}

注意：上述代碼僅為演示目的，請謹慎操作并確保對SCSI設備的訪問有合法的權限。在實際使用時，請根據您的需求和環境進行相應的修改和錯誤處理。