itopen組織
1、提供OpenHarmony優雅實用的小工具
2、手把手適配riscv + qemu + linux的三方庫移植
3、未來計劃riscv + qemu + ohos的三方庫移植 + 小程序開發
4、一切擁抱開源，擁抱國產化

一、小于2T磁盤掛載方式

1.1 安裝磁盤到電腦后啟動系統

1.2 查找未分區的磁盤

• 打開終端輸入sudo fdisk -l查找到?jīng)]有分區的磁盤
• 已經分區的磁盤會有對應的Device Start End Sectors Size Type信息，而未分區的磁盤沒有對應的信息，通過查看當前/dev/nvme0n1是新增加的未分區磁盤

$ sudo fdisk -l
[sudo] password for wen_fei:
Disk /dev/nvme0n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors # 未分區的磁盤
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesDisk /dev/nvme1n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors # 已分區的磁盤
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 6F0C9477-25AA-45D6-A027-C7186A2C5918Device             Start        End    Sectors  Size Type
/dev/nvme1n1p1      2048    5859327    5857280  2.8G EFI System
/dev/nvme1n1p2   5859328  162109439  156250112 74.5G Linux filesystem
/dev/nvme1n1p3 162109440  220702719   58593280   28G Linux filesystem
/dev/nvme1n1p4 220702720  298827775   78125056 37.3G Linux filesystem
/dev/nvme1n1p5 298827776  376952831   78125056 37.3G Linux filesystem
/dev/nvme1n1p6 376952832  416014335   39061504 18.6G Linux filesystem
/dev/nvme1n1p7 416014336 3907028991 3491014656  1.6T Linux filesystemDisk /dev/nvme2n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors # 已分區的磁盤
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: B6155B74-845D-4234-B637-4308B3F0C56DDevice         Start        End    Sectors  Size Type
/dev/nvme2n1p1  2048 3907028991 3907026944  1.8T Linux filesystem

1.3 磁盤分區

• 對未分區的磁盤執行命令sudo fdisk /dev/xxx
• 根據提示輸入m查看指令信息
• 根據提示輸入n開始創建分區
• 根據提示輸入p表示創建主分區，或者輸入?yún)^(qū)e表示創建邏輯分區：一塊硬盤最多只能創建4個主分區，邏輯分區可以創建若干個
• 根據提示輸入x表示創建x個分區說明： 我們掛載磁盤一般只創建一個分區即可，直接輸入1即可
• 根據提示直接回車設置分區開始位置是從第2048個扇區開始： 由于EFI的興起，要給EFI代碼留磁盤最開始的1M空間，即2048521/(10241024)=1M，因此分區默認第2048個扇區開始
• 根據提示直接回車設置分區結束位置為磁盤末尾
• 根據提示輸入w保存分區設置

$ sudo fdisk /dev/nvme0n1Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x20e2fdf1.Command (m for help): mHelp:DOS (MBR)a   toggle a bootable flagb   edit nested BSD disklabelc   toggle the dos compatibility flagGenericd   delete a partitionF   list free unpartitioned spacel   list known partition typesn   add a new partitionp   print the partition tablet   change a partition typev   verify the partition tablei   print information about a partitionMiscm   print this menuu   change display/entry unitsx   extra functionality (experts only)ScriptI   load disk layout from sfdisk script fileO   dump disk layout to sfdisk script fileSave & Exitw   write table to disk and exitq   quit without saving changesCreate a new labelg   create a new empty GPT partition tableG   create a new empty SGI (IRIX) partition tableo   create a new empty DOS partition tables   create a new empty Sun partition tableCommand (m for help): n
Partition typep   primary (0 primary, 0 extended, 4 free)e   extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-3907029167, default 2048):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-3907029167, default 3907029167):Created a new partition 1 of type 'Linux' and of size 1.8 TiB.Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

1.4 格式化分區

• 輸入命令sudo mkfs -t ext4 /dev/xxx進行格式化磁盤
• 記住生成磁盤的UUID為掛載磁盤使用

$ sudo mkfs -t ext4 /dev/nvme0n1
mke2fs 1.45.5 (07-Jan-2020)
Found a dos partition table in /dev/nvme0n1
Proceed anyway? (y,N) y
Discarding device blocks: done
Creating filesystem with 488378646 4k blocks and 122101760 inodes
Filesystem UUID: 330fdef4-df72-47ab-afa0-0ff08ae4999f
Superblock backups stored on blocks:32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,102400000, 214990848Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

1.5 設置開機自動掛載

• 打開文件/etc/fstab添加新分區掛載到/data目錄

$ sudo vim /etc/fstab
# /datb was on /dev/nvme3n1p1 during installation
UUID=330fdef4-df72-47ab-afa0-0ff08ae4999f /data           ext4    defaults        0       2

1.6 重啟系統

• 系統重啟后查看已經有目錄/data表示掛載新磁盤成功

  1.7 刪除分區

• 卸載分區：使用sudo umount xxx

• 對已分區的磁盤執行命令sudo fdisk /dev/xxx

• 根據提示輸入m查看指令信息

• 根據提示輸入d開始刪除最后一個分區，如果想刪除更多的分區，則不停的輸入d即可

• 根據提示輸入p表示打印分區表

• 根據提示輸入w表示保存分區設置

• 刪除/etc/fstab中原UUID掛載的磁盤

$ sudo fdisk /dev/nvme0n1Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.Command (m for help): mHelp:DOS (MBR)a   toggle a bootable flagb   edit nested BSD disklabelc   toggle the dos compatibility flagGenericd   delete a partitionF   list free unpartitioned spacel   list known partition typesn   add a new partitionp   print the partition tablet   change a partition typev   verify the partition tablei   print information about a partitionMiscm   print this menuu   change display/entry unitsx   extra functionality (experts only)ScriptI   load disk layout from sfdisk script fileO   dump disk layout to sfdisk script fileSave & Exitw   write table to disk and exitq   quit without saving changesCreate a new labelg   create a new empty GPT partition tableG   create a new empty SGI (IRIX) partition tableo   create a new empty DOS partition tables   create a new empty Sun partition tableCommand (m for help): d
Selected partition 1
Partition 1 has been deleted.Command (m for help): p
Disk /dev/nvme0n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xcd706ecbCommand (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

二、大于2T磁盤掛載方式

2.1 安裝磁盤到電腦后啟動系統

2.2 查找未分區的磁盤

• 打開終端輸入sudo fdisk -l查找到?jīng)]有分區的磁盤
• 已經分區的磁盤會有對應的Device Start End Sectors Size Type信息，而未分區的磁盤沒有對應的信息，通過查看當前/dev/nvme0n1是新增加的未分區磁盤

$ sudo fdisk -l
[sudo] password for wen_fei:
Disk /dev/nvme0n1: 3.74 TiB, 4096805658624 bytes, 8001573552 sectors
Disk model: Lexar SSD ARES 4TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytesDisk /dev/nvme1n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors # 已分區的磁盤
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 6F0C9477-25AA-45D6-A027-C7186A2C5918Device             Start        End    Sectors  Size Type
/dev/nvme1n1p1      2048    5859327    5857280  2.8G EFI System
/dev/nvme1n1p2   5859328  162109439  156250112 74.5G Linux filesystem
/dev/nvme1n1p3 162109440  220702719   58593280   28G Linux filesystem
/dev/nvme1n1p4 220702720  298827775   78125056 37.3G Linux filesystem
/dev/nvme1n1p5 298827776  376952831   78125056 37.3G Linux filesystem
/dev/nvme1n1p6 376952832  416014335   39061504 18.6G Linux filesystem
/dev/nvme1n1p7 416014336 3907028991 3491014656  1.6T Linux filesystemDisk /dev/nvme2n1: 1.84 TiB, 2000398934016 bytes, 3907029168 sectors # 已分區的磁盤
Disk model: Samsung SSD 980 PRO 2TB
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: B6155B74-845D-4234-B637-4308B3F0C56DDevice         Start        End    Sectors  Size Type
/dev/nvme2n1p1  2048 3907028991 3907026944  1.8T Linux filesystem

2.3 磁盤分區

• 對未分區的磁盤執行命令sudo parted /dev/xxx
• 根據提示輸入mklabel gpt建立GPT分區
• 根據提示輸入Yes開始創建分區
• 根據提示輸入mkpart primary ext4 0% 100%創建主分區
• 根據提示輸入print查看詳細信息
• 根據提示輸入quit退出

$ sudo parted /dev/nvme0n1
GNU Parted 3.3
Using /dev/nvme0n1
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) mklabel gpt
Warning: The existing disk label on /dev/nvme0n1 will be destroyed and all data on this disk will be lost. Do you want to
continue?
Yes/No? Yes
(parted) mkpart primary ext4 0% 100%
(parted) print
Model: Lexar SSD ARES 4TB (nvme)
Disk /dev/nvme0n1: 4097GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:Number  Start   End     Size    File system  Name     Flags1      1049kB  4097GB  4097GB  ext4         primary(parted) quit
Information: You may need to update /etc/fstab.

2.4 格式化分區

• 輸入命令sudo mkfs -t ext4 /dev/xxx進行格式化磁盤
• 記住生成磁盤的UUID為掛載磁盤使用

$ sudo mkfs -t ext4 /dev/nvme0n1
mke2fs 1.45.5 (07-Jan-2020)
/dev/nvme0n1 contains a ext4 file systemcreated on Wed Jul  3 17:44:09 2024
Proceed anyway? (y,N) y
Discarding device blocks: done
Creating filesystem with 1000196694 4k blocks and 250052608 inodes
Filesystem UUID: 7918bc9f-458c-442f-b586-53fa657b4ad2
Superblock backups stored on blocks:32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,102400000, 214990848, 512000000, 550731776, 644972544Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

2.5 設置開機自動掛載

• 打開文件/etc/fstab添加新分區掛載到/data目錄

$ sudo vim /etc/fstab
# /datb was on /dev/nvme3n1p1 during installation
UUID=7918bc9f-458c-442f-b586-53fa657b4ad2 /data           ext4    defaults        0       2

2.6 重啟系統

• 系統重啟后查看已經有目錄/data表示掛載新磁盤成功