背景：跑模型玩時，發現機子硬盤太小了，搞個1t固態作為掛載盤。以下為操作全流程記錄

1、開始root權限操作

sudo su

若進不去，考慮是否給root設置過密碼，新系統第一次進入需要設置密碼。

進入成功：

root@y:/#

2、查看硬盤掛載情況

lsblk

3、將未分配的硬盤的創建分區

fdish /dev/sda	# 注意指令名稱為2中表示的掛載盤名稱

終端提示：
Command （m for help）：輸入：n
依次輸入p 和 1
接著便會提示卷的起始地址和結束地址，都保持默認按回車的即可（意思是只分一個區）
輸入“w”保存并推出

檢測分區成功：fdish -l

Device     Start        End    Sectors   Size Type
/dev/sda1   2048 1953525134 1953523087 931.5G Linux filesystem

至此，/dev/sda盤以分區成功（sda1,是正常的）

參考

4、初始化為pv

pvcreate /dev/sda1

創建成功校驗：

root@y:/# pvdisplay --- Physical volume ---PV Name               /dev/sda1VG Name               PV Size               931.51 GiB / not usable 4.69 MiBAllocatable           yes PE Size               4.00 MiBTotal PE              238466Free PE               130Allocated PE          238336PV UUID               nvOIhv-ccpX-40nH-u9x0-ZXBu-Jgnv-s3RTg

5、創建卷組（vg）并把pv加入卷組中

vgcreate h /dev/sda1創建成功校驗：
root@y:/# vgdisplay --- Volume group ---VG Name               hSystem ID             Format                lvm2Metadata Areas        1Metadata Sequence No  6VG Access             read/writeVG Status             resizableMAX LV                0Cur LV                1Open LV               1Max PV                0Cur PV                1Act PV                1VG Size               <931.51 GiBPE Size               4.00 MiBTotal PE              238466Alloc PE / Size       238336 / 931.00 GiBFree  PE / Size       130 / 520.00 MiBVG UUID               YAy8nO-qfYK-5cZy-pFJz-ixAh-WVPZ-f3M4qV

6、基于卷組（vg）創建邏輯卷（lv）

lvcreate -n d -L 931G h

注意，d 是自己取的名字，931G是自己掛載盤的大小，此兩根據個人情況調整

創建成功校驗：

root@y:/# lvdisplay --- Logical volume ---LV Path                /dev/h/dLV Name                dVG Name                hLV UUID                712DiJ-DX8o-UINn-AUMT-REFm-UotT-nDUii7LV Write Access        read/writeLV Creation host, time y, 2023-10-06 16:05:37 +0800LV Status              available# open                 1LV Size                931.00 GiBCurrent LE             238336Segments               1Allocation             inheritRead ahead sectors     auto- currently set to     256Block device           253:0

7、格式化邏輯卷并掛載

mkfs.ext4 /dev/h/d	# 格式化邏輯卷，需要給全路徑

mount /dev/h/d /mnt	# 將已初始化的邏輯卷掛載到/mnt目錄（該文件夾裝系統時已自帶且為空，可根據個人實際情況調整，注意給全路徑）

參考

8、系統自動掛載操作

1）查看UUID與類型

sudo blkid

在打印輸出查看掛載盤信息：

/dev/mapper/h-d: UUID="6b684323-82ca-47a9-bec9-d26b09364fdd" TYPE="ext4"

2）修改fstab文件

sudo vim /etc/fstab

目的添加

uuid	掛載文件夾	文件類型	defaults	0	2

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/nvme0n1p7 during installation
UUID=a80478f4-abf2-4354-9e01-5c986515f58d /               ext4    errors=remount-ro 0       1
# /boot was on /dev/nvme0n1p5 during installation
UUID=0eda1190-5b7f-4670-a18a-f09d81ab5937 /boot           ext4    defaults        0       2
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=A5EB-573A  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/nvme0n1p8 during installation
UUID=07093e4a-3b5c-4b14-ae7f-ff1b5cb5616d /home           ext4    defaults        0       2
# swap was on /dev/nvme0n1p6 during installation
UUID=d63a283a-2fab-4c0f-837c-20e47e9b81a5 none            swap    sw              0       0# ylh_231006 /dev/mapper/h-d expand dish
UUID=6b684323-82ca-47a9-bec9-d26b09364fdd	/mnt	ext4	defaults	0	2

具體字段含義可參考

3)重啟

reboot

4)校驗自動掛載成功

(base) ylh@y:~$ df -lh
Filesystem       Size  Used Avail Use% Mounted on
udev              16G     0   16G   0% /dev
tmpfs            3.2G  2.2M  3.2G   1% /run
/dev/nvme0n1p7    47G   24G   21G  54% /
tmpfs             16G  252M   16G   2% /dev/shm
tmpfs            5.0M  4.0K  5.0M   1% /run/lock
tmpfs             16G     0   16G   0% /sys/fs/cgroup
/dev/loop0       128K  128K     0 100% /snap/bare/5
/dev/loop2        46M   46M     0 100% /snap/snap-store/638
/dev/loop1        64M   64M     0 100% /snap/core20/1828
/dev/loop3       205M  205M     0 100% /snap/cloudcompare/208
/dev/loop9       347M  347M     0 100% /snap/gnome-3-38-2004/119
/dev/loop4        56M   56M     0 100% /snap/core18/2790
/dev/loop5        64M   64M     0 100% /snap/core20/2015
/dev/loop8        50M   50M     0 100% /snap/snapd/18357
/dev/loop6        41M   41M     0 100% /snap/snapd/20092
/dev/loop7        92M   92M     0 100% /snap/gtk-common-themes/1535
/dev/loop10      350M  350M     0 100% /snap/gnome-3-38-2004/143
/dev/mapper/h-d  916G  181M  869G   1% /mnt
/dev/nvme0n1p5   943M  193M  685M  22% /boot
/dev/nvme0n1p8   101G   32G   64G  33% /home
/dev/nvme0n1p1   300M   51M  250M  17% /boot/efi
tmpfs            3.2G   20K  3.2G   1% /run/user/126
tmpfs            3.2G   44K  3.2G   1% /run/user/1000

/dev/mapper/h-d  916G  181M  869G   1% /mnt	# 表示自動掛載成功

#############
好記性不如爛筆頭
積少成多

覺得還不錯的話，點贊收藏哈